Post by Feezy F Baby on Feb 26, 2005 3:11:42 GMT
Diagnol Scanlines
Created By: VivaLaRaza
1. Open a new image document with a width and hieght of 3x3 and make the background of the image transparent.
2. Zoom the image to 1600%(Ctrl+0 <-------zero not o).
3. Then select the pencil tool and set the settings like this picture:
click here
4. Then draw 3 dots with the pencil like this(any side)
for example:
1
or...
2
5. The go to Edit > Define Pattern
6. Then when you want to use the scanlines, open a image, make a new layer(Ctrl+Shift+Alt+N) then select the whole image(Ctrl+A) then go to Edit > Fill, then choose the pattern and set the blending mode to Soft Light and change the Qpacity to any % you want
Regular Scanlines
Created By: VivaLaRaza
1. Open a new document with the width and hieght of 2x1 or 1x2(width is the 1st #)with a transparent background.
2. Zoom the image to 1600%(Ctrl+0 <-------zero not o).
3. Then select the pencil tool and set the settings like this picture:
click here
4. The draw a dot like this:
if your image is 1x2:
if your image is 2x1:
5. The go to Edit > Define Pattern
6. Then when you want to use the scanlines, open a image, make a new layer(Ctrl+Shift+Alt+N) then select the whole image(Ctrl+A) then go to Edit > Fill, then choose the pattern and set the blending mode to Soft Light and change the Qpacity to any % you want
Dots
Created By: VivaLaRaza
1. Open a new image document with a width and hieght of 3x3 and make the background of the image transparent.
2. Zoom the image to 1600%(Ctrl+0 <-------zero not o).
3. Then select the pencil tool and set the settings like this picture:
click here
4. Draw a dot in the middle of the image like this pic:
5. The go to Edit > Define Pattern
6. Then when you want to use the scanlines, open a image, make a new layer(Ctrl+Shift+Alt+N) then select the whole image(Ctrl+A) then go to Edit > Fill, then choose the pattern and set the blending mode to Soft Light and change the Qpacity to any % you want
Advanced Dots
Created By: VivaLaRaza
1. Open a new image document with a width and hieght of 5x5 and make the background of the image transparent.
2. Zoom the image to 1600%(Ctrl+0 <-------zero not o).
3. Then select the pencil tool and set the settings like this picture:
click here
4. The draw the dots like this(the gray color's hex# is B0B0B0)
>>Pic Here<<
5. The go to Edit > Define Pattern
6. Then when you want to use the scanlines, open a image, make a new layer(Ctrl+Shift+Alt+N) then select the whole image(Ctrl+A) then go to Edit > Fill, then choose the pattern and set the blending mode to Soft Light and change the Qpacity to any % you want
Hope that helped you guys
